Sunday, May 4, 2008

Just What The Heck Do Those Recycling Codes Mean Anyway?

This is way overdue for a lot of reasons, but lets' just say I've got a lot on my plate and I tend to bite off more than I can chew and leave it at that. We are all familiar with the little green recycling symbol on the left that appears on so many products these days, but how many of us actually understand what the codes that go with them mean? HDPE, PETE, LDPE? I sure didn't and so I decided to do a little investigating. I'm going to hit the highlights, but there are a ton of good sources of info out there like the one at The Daily Green. Also, if you are trying to figure out where to recycle ANYTHING at all near you, check out Earth 911.

Live Sustainably


Dave


Number 1 Plastics: PET or PETE (plyethelene terephthalate)
PETE is most commonly found in soda and water bottles but is also used to make peanut butter jars and veggie oil containers as well. It is usually downcycled to make items like polar fleece, tote bags, fibers and carpet. Most beverage bottles are made of this stuff as it is inexpensive and lightweight, but shockingly the recycle rates are only at around 20%.

Number 2 Plastics: HDPE(high density polyethylene)
This stuff is a bit heavier and is most commonly recognized in milk jugs, household cleaner bottles, shampoo bottles, some garbage bags, and cereal box liners. HDPE is generally recycled into laundry detergent bottles, plastic lumber, pens, and floor tiles to name a few.

Number 3 Plastics: PVC (polyvinyl chloride)
PVC is found in clear food packaging, some window cleaner and detergent bottles, and the outer jacketing of electrical cables (think ethernet cables). It's not as readily recycled and is pretty nasty stuff as its manufacture and burning releases toxins into the atmosphere. When it is taken for recycling, it can be turned into mudflaps, cables, speed bumps and floor mats. PVC can contain a softener (di-2-ehtylhexyl phthalate (DEHP)) which has been shown to be an endocrine disruptor and human carcinogen so you may want to avoid it altogether. Good times!

Number 4 Plastics: LDPE (low density plyethylene)
This is the stuff we probably see the most of after PETE in water bottles as it's what goes into those plastic shopping bags. Other uses are squeezy dispenser bottles, bread and frozen food bags, and some clothing and furniture. LDPE is becoming easier to turn in for recycling and can be used to make trash can liners, shipping containers, composters and envelopes.

Number 5 Plastics: PP (polypropylene)
You'll see PP 5 in bottle caps, plastic drinking straws, some plastic food containers and medicine bottles. Polypropylene is one of the more commonly accepted plastics for recycling and can become signal lights, brooms and brushes, ice scrapers, and landscaping borders. Because it has a high melting point, it is commonly used in things that will come in contact with heat.

Number 6 Plastics: PS (polystyrene)
Another commonly found one, PS is used on carry out containers, compact disc cases, egg cartons, and "disposable" cups and plates. It is fairly hard to recycle this stuff (many areas do not accept it) and has been proven to leach carcinogenic toxins in many instances. Polystyrene is most commonly found in Styrofoam (they inject it with air to make it light and give it that texture) and can be turned into insulation, light plate switches, foam packing and egg cartons and carry out containers.

Number 7 Plastics: Everything else.
Ok, this is a weird one. In an attempt to label everything, they came up with number 7 for things that don't fit in 1-6. Some of the products that carry a 7 are 5 gallon water dispenser bottles, bulletproof material (hopefully you won't need to recycle this stuff), computer cases, dvds, and a whole host of other things. A lot of local recycling programs won't take number 7 for the obvious reason that they don't immediately know what's what. This is a bummer cause as of right now, many compostable products carry a number 7 on them and are therefore not always recyclable. Crazy but it's true. It should also be noted that Polycarbonate which carries a number 7 and is used in many baby bottles and reusable sports bottles(Nalgene), as well as those office water jugs, contains the hormone disruptor bisphenol-A which has been shown to leach out due to age or heating over the long term. Ain't science fun?

So there you have it. This is only meant as an overview but I think it's worth noting that many of the plastics listed above are not truly recycled (turned back into what they were originally intended for) but instead downcycled (turned into other stuff). As a result, while the plastic is getting a longer life, eventually it's still most likely going to end up in that landfill and they're just going to have to keep on starting the chain over new from the top every time. All of this requires a tremendous amount of energy, creates a tremendous amount of waste, and adds a ton of pollutants to the planet. So while we all need to Reduce, Reuse, Recycle and let it Rot, it seems like we should add Refuse to the head of that list and not use these products to begin with.

Food for thought.

Dave


1 comment:

Anonymous said...

I just wanted to say that I appreciate this and think you did an awesome job! Hats off to you!

blessings

chason
http://myspace.com/chasonflandersmusic